Justrite Make-A-Berm, Drain Plug, Black, 2 High X 10 Long Inch, PVC, 28499

.

. Justrite 355 Gallon Spill Capacity, Spill Containment Berm with Inside Wall Supports, QuickBerm®, Black, 6' x 8' x 12", 28538 | Justrite 355 Gallon Spill Capacity, Spill Containment Berm with Inside Wall Supports, QuickBerm®, Black, 6' x 8' x 12", 28538 Helps comply with EPA for containment and spill prevention (SPCC). High-visibility yellow inside supports alert against potential catch hazards inside while keeping exterior free from trip hazards found in other berms with exterior support systems. Sets up in mere minutes, great for efficiency and quick response under emergency spill conditions.

Note: the difference between the QuickBerm® Plus and the standard Rigid-Lock QuickBerm® is the durability of the modified PVC-coated fabric. | Justrite 235 Gallon Spill Capacity, Drive Over Berm, Rigid-Lock QuickBerm®, Black, 4' x 8' x 12", Stainless Steel/PVC, 28514 Supports resist extreme temperatures (-50F to 160F). Built-in stainless steel wall supports lock the sidewalls in a 12-in (305-mm) high, 90° vertical position. The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter.

Reinforced CriticalCorner™ design features wraparound diagonal welds for superior strength and fluid-tight reliability.Berm withstands a broad range of chemicals including petroleums and most acids, and is durable enough for extended wear. Sets up in mere minutes, great for efficiency and quick response under emergency spill conditions. High-visibility yellow inside supports alert against potential catch hazards inside while keeping exterior free from trip hazards found in other berms with exterior support systems.

The patented Rigid-Lock wall-support design protects personnel against trips and falls when walking along the outside perimeter. The device only folds down one way, inward towards the inside of the berm. The built-in Rigid-Lock wall supports maximize usable space inside the berm and greatly reduce any tripping hazard on the berm perimeter. In case of damage, for example a user drives out of the berm without lowering the wall to the proper exit position, the stainless steel supports are replaceable.

Reinforced CriticalCorner™ design features wraparound diagonal welds for superior strength and fluid-tight reliability.

The weight of vehicles or hand trucks can damage the PVC tubing.| Justrite Make-A-Berm, Drain Plug, Black, 2 High x 10 Long inch, PVC, 28499 Justrite Make-A-Berm, Drain Plug, Black, 2 High x 10 Long inch, PVC, 28499 The plug should be added in the lowest point of the containment area. The drain plug is made of PVC coated fabric and can be easily added to any part of the berm configuration..

. | Justrite Make-A-Berm, Heavy Duty Vertical Corner, 2 per Box, Orange, 2" High, PVC, 28498 Heavy Duty vertical corner pieces are key to providing a full spill containment, by giving you needed protected at a wall or vertical barrier seam.Make-A-Berm™ allows for spill containment to be installed around difficult to move equipment, spill-prone areas, or areas where a standard-shaped berm wont’ work.

. Make-A-Berm™ drain plug is used to drain innocuous fluids, such as rain or snowmelt. The drain plug is made of PVC coated fabric and can be easily added to any part of the berm configuration.

. | Justrite Make-A-Berm, Heavy Duty Vertical Corner, 2 per Box, Orange, 2" High, PVC, 28498 Heavy Duty vertical corner pieces are key to providing a full spill containment, by giving you needed protected at a wall or vertical barrier seam. Justrite Make-A-Berm, Heavy Duty Vertical Corner, 2 per Box, Orange, 2" High, PVC, 28498 The heavy-duty vertical corner pieces are easily attached to the wall or vertical barrier with polyether-based adhesive.Make-A-Berm™ allows for spill containment to be installed around difficult to move equipment, spill-prone areas, or areas where a standard-shaped berm wont’ work.