Justrite Plunger Spring For Plunger Dispensing Can P701, 701PS

Justrite Black, 730C0048BL V-Groove Corrugated Runner™ is made from a durable vinyl compound that features a rib-tooth design to improve traction.

Suction Option Assembly: Internal 1/4-in (6mm) ID polytetrafluoroethylene (PTFE) tubing with stainless steel fitting is installed below disconnect (of your specification) to allow for safe dispensing of fluid out of the can. Custom Quick-Disconnect Disposal Cans can be designed with up to eight fittings. NOTE: must be used under suction only.

| Justrite Stainless Steel Fitting Disconnect Assembly with EPDM for 1/4" ID Tube, Installed, Stainless Steel/Polypropylene, 12017 A minimum of two disconnect fittings is required, one intake and one vent.. Custom Quick-Disconnect Disposal Cans can be designed with up to eight fittings.

NOTE: must be used under suction only. Polypropylene Fitting for 3/8-in (10mm) ID tubing: This fitting is equipped with EPDM seals with 1/4-in (6mm) flow.

.| Justrite Black, 730C0036BL The low profile matting allows for easy on/off cart traffic and can also be used as a liner for maintenance and tool carts. Justrite Black, 730C0036BL V-Groove Corrugated Runner™ is made from a durable vinyl compound that features a rib-tooth design to improve traction.

| Justrite Black, 730C0024BL The low profile matting allows for easy on/off cart traffic and can also be used as a liner for maintenance and tool carts.. Justrite Black, 730C0024BL V-Groove Corrugated Runner™ is made from a durable vinyl compound that features a rib-tooth design to improve traction.

Plunger Spring, Fits P701 | Justrite Plunger Spring for Plunger Dispensing Can P701, 701PS.

Justrite Stainless Steel Fitting Disconnect Assembly with Viton for 1/4" ID Tube, Installed, Stainless Steel/Polypropylene, 12015 Stainless Steel Fitting for 3/8-in (10mm) ID tubing: Based on your application choose polytetrafluoroethylene (PTFE), Viton® or EPDM seals with 1/4-in (6mm) flow. Custom Quick-Disconnect Disposal Cans can be designed with up to eight fittings. Stainless Steel Fitting for 1/4-in (6mm) ID tubing: Based on your application choose polytetrafluoroethylene (PTFE), Viton® or EPDM seals with 1/4-in (6mm) flow.

Plunger Spring, Fits P701 | Justrite Plunger Spring for Plunger Dispensing Can P701, 701PS.

Unless otherwise specified, vent fitting on all cans will be the same as intake fitting.